Professional robot in
which implemented the classic strategy of trade on the indicator Ichimoku. Signal is generated when a change of the trend Ishimoku. For this
we will analyze the intersection of the lines Tenkan-sen and Kijun-sen. signal to
buy is generated when the Tenkan-sen line crosses the Kijun-sen from the bottom up.
Crossing the downward signal is to be sold. Expert correctly handles errors, and works reliably
On the market. Working capital of $ 100! It is important to choose a line of work, or
the two sides, or only to buy or sell. Also, the signal can be
The expert uses
basic concepts: breakeven, trawl, stoploss and take profit, as well as on the closing
opposite signal. And an important function – correct calculation of risk. No output function unit lot, used
the concept of risk, stop loss is required, since it is measured from the lot
relatively acceptable loss for a given risk.
Any expert who is optimized without risk,
using a fixed lot, will obviously incorrect results. Since when
steal up optimization options that will increase the balance in the initial
interval history. Then everything is simple, with a large supply balance, and working
fixed lot, will be able to pass any number of stories! but when
This running expert, a different place, on the history, it is likely
drain. Therefore, the concept of risk in the optimization and the work required! In this
Risk case works 1 – is 1% of the deposit. The expert also has built-in advanced features
optimization of sorting, that is, it is desirable to optimize using the mode “Custom max“.
Overview of parameters:
- Magic – The magic number, an arbitrary integer.
- Work Period – The period for which the expert works.
- Risk –
Risk, which is included in the market is given in percentage of the total loss of the deposit,
Lot determined relative stoploss and allowable losses when the
- LotRounding – Rounding of the lot (before decimal point).
- Deviation –
- Sleeps –
Waiting for the opening, closing or modifying the position.
- Withdraw –
Virtual withdrawals in the tester, as a percentage of the starting
deposit (necessary when optimizing a long period, to protect from the saturation
- StopLoss –
- TakeProfit –
- Trailing Period – The period that runs the trawl.
- Trailing Breakeven – Level bezubytka, 0 – off.
- Trailing Start – The level of the beginning of the trawl, 0 – off.
- Trailing Stop – trawl level 0 – off trawl paragraphs, the active period of the trawl.
- TrailingStep Period – Trawl the period.
- Prohibit new series – If you want to finish the current position, and
open the following, you need to include this switch (support
position before disconnecting the expert).
- WorkOpenLong – Permission to open a long position.
- WorkOpenShort – Permission to open a short position.
- WorkCloseLong – Resolution on the closing of long positions.
- WorkCloseShort – Resolution on the closing of short positions.
- Inversion –
Inverting input signal.
- SignalBar –
Bar, from which begin to look at the (1 – the first fully
- Signal Period – the period for which indicators work.
- TenkanSen –
- KijuunSen –
- SenkouSpanB – Parameter SenkouSpanB.
Instructions for optimization in standard mode:
optimize using mode – “Custom
max“Which has a function of a progressive optimization that
able to slightly increase the potential forecast. establish
time interval equal to the operating period (Work Period), This period must be less than any other in
settings. install only
opening price, to optimize speed. Set the desired
time period, if necessary, and then forward, as desired.
It is important to
optimization pick (Signal Period)
since it determines the result, if the period is too small and the noise level
exceeds the signal strength prediction, the result will be lost if the
too big, it will be inefficient, have a few positions. must run
repeatedly optimize and estimate this parameter. The optimization of
Default included permission to work in the specified direction, and closing
alarm. For trawl method is selected not on the items and using the last bar
said time interval (TrailingStep
Period), (Trailing Stop= 0).
default settings, set to optimize the following fields:
- StopLoss – 50/10/200
- TakeProfit – 100/10/300
- Trailing Breakeven – 10/20/50
- Trailing Start – 100/10/300
- TenkanSen – 03/01/27
- KijuunSen – 08/01/88
- SenkouSpanB – 13/1/160
MACD 3TF VI Martingale Expert MACD 3TF VI Martingale from the series “Trading systems with increased volume position.” Here is a brief description. A…
Donchian Filter tfmt5 As with our other adviser Turtle, this system is based on the price channel breakout (Price Channel), and Donchian channel, and…
Multi Expert System TRADING WAY Capabilities: Terms of expert inputs and outputs generated by the indicator MultiSignals_PCH , which can be downloaded…
- Stop close only orders